VND5E050J-E
| Parameters | |
|---|---|
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 38A |
| Base Part Number | VND5E050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
VND5E050J-E Overview
A Tube is used to package it.It is included with the PowerSSO-12 package as well.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the VND5E050 family.It consists of 12 terminations in total.12 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 27A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.It is positioned in the direction of Surface Mount.The LED driver has a total of 12 pins.Currently, the LED driving board has 50mOhm resistance.These electrical components are part of the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set at 13V.6mA is the maximum current required to operate it.
VND5E050J-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050J-E Applications
There are a lot of STMicroelectronics VND5E050J-E Power Switches ICs applications.
- Solid State Drivers
- Solid-State Drives
- Hot-Swap Systems
- Hot Swap
- Portable Video Game Players
- HDD, SSD
- Gaming
- Portable/Handheld Devices
- Wearable Devices
- Mobile Communication Devices
