VND5E050JTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 38A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E050JTR-E Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 12-PowerLSOP (0.154, 3.90mm Width) package as well.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 2 outputs that can be used.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart features.This object belongs to the VND5E050 family.A total of 12 terminations can be found in it.12 pins are used for operation.It contains 1 functions.The maximum output current is reduced to 27A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the way of Surface Mount.A total of 12 pins are present on it.The LED driver has 50mOhm resistance.These electrical components are part of the VIPower? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Optimal efficiency requires a voltage of 13V.A maximum current requirement of 6mA is required for its operation.
VND5E050JTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050JTR-E Applications
There are a lot of STMicroelectronics VND5E050JTR-E Power Switches ICs applications.
- Portable Video Game Players
- USB Power Distribution
- Notebook and Tablet Computers
- Wearable Devices
- Wireless/Networking Cards
- Notebook PC
- PDAs
- Hot-Swap Systems
- Portable GPS Device
- Set-top-box
