VND5E050K-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E050K-E Overview
The package is in the form of a Tube.There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.This object belongs to the VND5E050 family.It contains 24 terminations.The operation is carried out using the 24 pins.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 19A.As long as the supply voltage is 13V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.There are 24 pins in total on this board.The VIPower? series includes this electrical component.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A supply voltage of 13V is recommended for maximum efficiency.A maximum current requirement of 6mA is required for its operation.
VND5E050K-E Features
Supplied from 13V
VND5E050K-E Applications
There are a lot of STMicroelectronics VND5E050K-E Power Switches ICs applications.
- Storage Drives
- Telecom and Network Systems
- Various applications equipped with buttons
- Wireless/Networking Cards
- Low Voltage I/O System Power
- PC Cards
- USB3.1 Power Delivery
- Portable GPS Device
- Portable/Handheld Devices
- USB Power Distribution
