VND5E050KTR-E
| Parameters | |
|---|---|
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
VND5E050KTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 24-SOP (0.295, 7.50mm Width) Exposed Pad package that includes it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart.This object belongs to the VND5E050 family.It contains 24 terminations.In order to operate, 24 pins are used.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 27A.The supply voltage can be 13V for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 24 pins are included in this LED driver.In this LED driving board, there is 50mOhm resistance.This electrical component is part of the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.When using this LED driving board, it is recommended that the supply voltage is set to 13V.It requires a maximum current requirement of 6mA.
VND5E050KTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050KTR-E Applications
There are a lot of STMicroelectronics VND5E050KTR-E Power Switches ICs applications.
- Hot Swap
- HDD, SSD
- Mobile Communication Devices
- USB Power Distribution
- PC Card Hot Swap
- Wearable Devices
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Gaming
- Low Voltage I/O System Power
