VND5E050MJTR-E
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5E050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
VND5E050MJTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 12-PowerLSOP (0.154, 3.90mm Width) package contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart features.As you can see, it comes from the VND5E050 family.As a result, there are 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 19A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.There are 12 pins in total on this board.There is an electrical component included in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order to achieve the best efficiency, the supply voltage should be set to 13V.For its operation, a maximum current requirement of 6mA is required.
VND5E050MJTR-E Features
Supplied from 13V
VND5E050MJTR-E Applications
There are a lot of STMicroelectronics VND5E050MJTR-E Power Switches ICs applications.
- Set-top-box
- Wearable Devices
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Gaming
- Wireless/Networking Cards
- Wireless Headsets
- USB Protection
- USB3.1 Power Delivery
- PDAs
