VND5E050MK-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5E050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E050MK-E Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There is a default setting of 2 for output.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Auto Restart.It comes under the family of VND5E050.There are 24 terminations in it.During operation, the 24 pins are used.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 19A.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 24 pins.This electrical component is part of the VIPower? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.When using this LED driving board, it is recommended that the supply voltage is set to 13V.It requires a maximum current requirement of 6mA.
VND5E050MK-E Features
Supplied from 13V
VND5E050MK-E Applications
There are a lot of STMicroelectronics VND5E050MK-E Power Switches ICs applications.
- USB Protection
- PDAs
- Wearable Devices
- Portable GPS Device
- Various applications equipped with buttons
- Solid-State Drives
- Hot Swap
- USB Power Distribution
- Storage (HDDs, SSDs)
- Set-top-box
