VND5E160AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E160AJ-E Overview
As a result, it is packaged in the form of a Tube.In the PowerSSO-12 package, it is included.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 2.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Auto Restart features is available.It belongs to the VND5E160 family.A total of 12 terminations have been found in it.The operation is performed through the 12 pins.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 10A.Using a voltage of 13V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.12 pins are equipped with it.There is 160mOhm resistance on the LED driver.This electrical component is included in the VIPower? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).For maximum efficiency, the supply voltage should be set to 13V.A maximum current requirement of 6mA is required for its operation.
VND5E160AJ-E Features
Supplied from 13V
Resistance of 160mOhm
VND5E160AJ-E Applications
There are a lot of STMicroelectronics VND5E160AJ-E Power Switches ICs applications.
- Hot Swap
- Storage (HDDs, SSDs)
- Portable Devices
- Handheld Devices
- Smartphone and PDA
- PC Cards
- HDD, SSD
- PDAs
- Notebook and Tablet Computers
- Hot Swap
