VND5E160AJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E160AJTR-E Overview
It is package in Tape & Reel (TR) case.It is included in the package 12-PowerLSOP (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.It is equipped with Auto Restart features.It belongs to the family VND5E160.It consists of 12 terminations in total.The operation is performed through the 12 pins.There are 1 functions of the LED driver.Maximum output current falls to 10A when operation criteria are met.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.12 pins are equipped with it.Currently, the LED driving board has 160mOhm resistance.This electrical component is part of the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 36V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.It requires a maximum current requirement of 6mA.
VND5E160AJTR-E Features
Supplied from 13V
Resistance of 160mOhm
VND5E160AJTR-E Applications
There are a lot of STMicroelectronics VND5E160AJTR-E Power Switches ICs applications.
- HDD, SSD
- Telecom and Network Systems
- Notebook PC
- Portable Video Game Players
- Set-top-box
- Storage (HDDs, SSDs)
- Smartphone and PDA
- USB Power Distribution
- Portable GPS Device
- Hot Swaps
