VND5E160MJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E160MJ-E Overview
A Tube is used to package it.In the PowerSSO-12 package, it is included.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.It is a member of the VND5E160 family.A total of 12 terminations can be found in it.During operation, the 12 pins are used.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 10A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this lighting driver.In total, it has 12 pins.160mOhm resistance is present in the lighting driver.A component of this type is included in the VIPower? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The supply voltage should be set at 13V for best efficiency.6mA is the maximum current required to operate it.
VND5E160MJ-E Features
Supplied from 13V
Resistance of 160mOhm
VND5E160MJ-E Applications
There are a lot of STMicroelectronics VND5E160MJ-E Power Switches ICs applications.
- USB Protection
- USB Ports/Hubs
- Mobile Communication Devices
- Portable/Handheld Devices
- Wireless Headsets
- Handheld Devices
- Hard Disk Drives
- USB Power Distribution
- Telecom and Network Systems
- Portable Devices
