VND5E160MJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E160MJTR-E Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 12-PowerLSOP (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.It has a total of Auto Restart features.It is part of the VND5E160 family of LED drivers.A total of 12 terminations have been recorded.In order to operate, 12 pins are used.It contains 1 functions.This results in the maximum output current dropping to 10A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the way of Surface Mount.In total, it has 12 pins.The LED driver has 160mOhm resistance.A component of this type is included in the VIPower? series.The output current is set to 10A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.The maximum current required for its operation is 6mA.
VND5E160MJTR-E Features
Supplied from 13V
Resistance of 160mOhm
VND5E160MJTR-E Applications
There are a lot of STMicroelectronics VND5E160MJTR-E Power Switches ICs applications.
- PC Cards
- Portable Music Players
- USB3.1 Power Delivery
- Notebook PC
- Notebook and Tablet Computers
- Gaming
- Smartphone and PDA
- Portable Video Game Players
- Mobile Communication Devices
- Set-Top Boxes
