VND5N07-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND5N07 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 5A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.25 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Turn Off Time | 5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 7.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VND5N07-1 Overview
The LED driver's packaged as a Tube.The TO-251-3 Short Leads, IPak, TO-251AA package contains it.This LED driving board is mounted using the mounting type Through Hole.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VND5N07.It contains 3 terminations.The operation is performed through the 3 pins.It consists of 1 functions.The LED driver output is limited to 3.5AV.This operation requires the maximum output current to be decreased to 5A.The lighting driver is mounted in the direction of Through Hole.It is equipped with a total of 3 pins.Lighting drivers with 200mOhm resistance are used.It is included in the OMNIFET II?, VIPower? series.The output current is set to 5A in this case.
VND5N07-1 Features
Resistance of 200mOhm
VND5N07-1 Applications
There are a lot of STMicroelectronics VND5N07-1 Power Switches ICs applications.
- Telecom and Network Systems
- PC Card Hot Swap
- Various applications equipped with buttons
- Portable GPS
- Hot-Swap Systems
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Set-Top Boxes
- PDAs
- Hot Swap
