VND5N07-1-E
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND5N07 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.25 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 7.4mm |
| Length | 6.5mm |
VND5N07-1-E Overview
As a result, it is packaged in the form of a Tube.It's included in the TO-251-3 Short Leads, IPak, TO-251AA package.The lighting driver has the mounting type Through Hole.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the VND5N07 family.It contains 3 terminations.In order to operate, 3 pins are used.As far as functions are concerned, the lighting driver has 1.There is a maximum output of 3.5AV from the LED driver.In order to meet the operation criteria, the maximum output current drops to 5A.High efficiency is possible at 5V supply voltage.The LED driving board is mounted in the way of Through Hole.The LED driving board is equipped with a total of 3 pins.Lighting drivers with 200mOhm resistance are used.A component of this type is included in the OMNIFET II?, VIPower? series.The output current is set to 5A in this case.In order to maximize efficiency, the supply voltage should be set at 18V.A maximum current requirement of 250μA is required for its operation.
VND5N07-1-E Features
Supplied from 5V
Resistance of 200mOhm
VND5N07-1-E Applications
There are a lot of STMicroelectronics VND5N07-1-E Power Switches ICs applications.
- Portable/Handheld Devices
- USB Power Distribution
- PDAs
- Wireless Headsets
- HDD and SSD
- USB Protection
- Low Voltage I/O System Power
- Portable Devices
- USB Ports/Hubs
- Wireless/Networking Cards
