Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Voltage - Rated DC |
70V |
Max Power Dissipation |
60W |
Technology |
MOS |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.25mm |
Current Rating |
5A |
Base Part Number |
VND5N07 |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Voltage |
70V |
Interface |
On/Off |
Nominal Supply Current |
250μA |
Current |
5A |
Output Configuration |
Low Side |
Power Dissipation |
60W |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Characteristics |
OPEN-DRAIN |
Drain to Source Voltage (Vdss) |
70V |
Continuous Drain Current (ID) |
5A |
Output Polarity |
TRUE |
Ratio - Input:Output |
1:1 |
Input Characteristics |
SCHMITT TRIGGER |
Voltage - Load |
55V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
70V |
Turn On Time |
0.25 µs |
Load Current |
5A |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
200m Ω (Max) |
Drain to Source Resistance |
200mOhm |
Turn Off Time |
5 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height |
2.4mm |
Length |
6.6mm |
Width |
6.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
VND5N07 Overview
A Tube is used to package it.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It comes under the family of VND5N07.There are 2 terminations in it.During operation, the 3 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.3 pins are equipped with it.It is included in the OMNIFET II?, VIPower? series.In this case, the output current is set to 5A.
VND5N07 Features
VND5N07 Applications
There are a lot of STMicroelectronics VND5N07 Power Switches ICs applications.
- USB Power Distribution
- Solid State Drivers
- Telecom and Network Systems
- Wireless Headsets
- Gaming
- Portable Devices
- Mobile Communication Devices
- Set-top-box
- Set-Top Boxes
- Notebook and Tablet Computers