VND5N07-E
| Parameters | |
|---|---|
| Drain to Source Voltage (Vdss) | 70V |
| Turn-Off Delay Time | 5 μs |
| Continuous Drain Current (ID) | 5A |
| Threshold Voltage | 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.63mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.28mm |
| Base Part Number | VND5N07 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Voltage | 70V |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 250μA |
| Current | 5A |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 ns |
| Switch Type | General Purpose |
VND5N07-E Overview
It is package in Tube case.There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The VND5N07 family contains this object.It consists of 2 terminations in total.It is necessary to use the 3 pins in order to operate the LED driver.It consists of 1 functions.The LED driver output is limited to 3.5AV.This results in the maximum output current dropping to 5A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 3 pins.200mOhm is the resistance of the lighting driver.This electrical component is part of the OMNIFET II?, VIPower? series.The output current is set to 5A in this case.
VND5N07-E Features
Supplied from 5V
Resistance of 200mOhm
VND5N07-E Applications
There are a lot of STMicroelectronics VND5N07-E Power Switches ICs applications.
- Set-Top Boxes
- PDAs
- Portable Music Players
- Gaming
- PC Cards
- USB Protection
- Portable GPS Device
- USB Ports/Hubs
- Mobile Communication Devices
- Set-top-box
