VND5N0713TR
| Parameters | |
|---|---|
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Drain to Source Voltage (Vdss) | 70V |
| Continuous Drain Current (ID) | 5A |
| Threshold Voltage | 800mV |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.25 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Turn Off Time | 5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Current Rating | 5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5N07 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
VND5N0713TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the VND5N07 family.In total, there are 2 terminations.The operation is carried out using the 3 pins.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 3.5A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 3 pins.This electrical component is included in the OMNIFET II?, VIPower? series.In this case, the output current is set to 5A.
VND5N0713TR Features
VND5N0713TR Applications
There are a lot of STMicroelectronics VND5N0713TR Power Switches ICs applications.
- Storage Drives
- Various applications equipped with buttons
- Set-top-box
- Telecom and Network Systems
- Mobile Communication Devices
- Gaming
- Hot Swap
- Portable/Handheld Devices
- Portable Devices
- USB3.1 Power Delivery
