VND5N07TR-E
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.28mm |
| Base Part Number | VND5N07 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Switch Type | General Purpose |
| Nominal Input Voltage | 18V |
| Turn-Off Delay Time | 150 ns |
| Continuous Drain Current (ID) | 5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.25 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Turn Off Time | 5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| On-State Resistance | 200mOhm |
| Height | 2.63mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
VND5N07TR-E Overview
A Tape & Reel (TR) is used to package it.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.This object belongs to the VND5N07 family.A total of 2 terminations have been found in it.Currently, there are 1 functions associated with the lighting driver.The maximum output of the LED driving board is 3.5AV.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.In total, it has 3 pins.In this case, there is 200mOhm resistance in the LED driving board.It belongs to the OMNIFET II?, VIPower? series.In this case, the output current will be set to 5A.
VND5N07TR-E Features
Supplied from 5V
Resistance of 200mOhm
VND5N07TR-E Applications
There are a lot of STMicroelectronics VND5N07TR-E Power Switches ICs applications.
- Hot Swaps
- Wearable Devices
- Portable GPS Device
- Portable GPS
- USB3.1 Power Delivery
- Mobile Communication Devices
- USB Power Distribution
- PDAs
- Wireless Modem Data Cards
- Gaming
