VND5T035AKTR-E
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5T035 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 42A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Operating Supply Current | 4.2mA |
| Nominal Supply Current | 4.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 46 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 30A |
| Nominal Input Voltage | 24V |
| Turn-Off Delay Time | 54 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 42A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
VND5T035AKTR-E Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 2 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is part of the VND5T035 family of LED drivers.It contains 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 42A to meet the operation criteria.With a supply voltage of 24V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 24 pins.In this case, there is 35mOhm resistance in the LED driving board.It is part of the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).The power supply of the part is 8/36V.In order to maximize efficiency, the supply voltage should be set at 24V.For its operation, a maximum current requirement of 6mA is required.
VND5T035AKTR-E Features
Supplied from 24V
Resistance of 35mOhm
VND5T035AKTR-E Applications
There are a lot of STMicroelectronics VND5T035AKTR-E Power Switches ICs applications.
- Portable Music Players
- Wearable Devices
- Mobile Communication Devices
- Hot Swap
- USB Ports/Hubs
- Hot-Swap Systems
- Notebook PC
- Set-top-box
- Portable Video Game Players
- Smartphone and PDA
