VND5T050AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5T050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 34A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 4.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 24A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 34A |
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5T050AK-E Overview
It's?packaged?in?the way?of?a?Tube.The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the family VND5T050.It consists of 24 terminations in total.In order to operate, 24 pins are used.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 34A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 24V.In this case, it is mounted in the way of Surface Mount.24 pins are equipped with it.In this LED driving board, there is 50mOhm resistance.There is an electrical component included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).This part has a power supply of 8/36V volts.It is recommended that the supply voltage be set at 24V in order to achieve maximum efficiency.For its operation, a maximum current requirement of 6mA is required.
VND5T050AK-E Features
Supplied from 24V
Resistance of 50mOhm
VND5T050AK-E Applications
There are a lot of STMicroelectronics VND5T050AK-E Power Switches ICs applications.
- USB Protection
- Wireless Headsets
- USB3.1 Power Delivery
- Hard Disk Drives
- Wearable Devices
- USB Power Distribution
- Storage Drives
- Telecom and Network Systems
- PDAs
- Notebook PC
