VND5T100AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Manufacturer Package Identifier | PowerSSO-12-GAPG0501161032CFT |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5T100 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 22A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 4.2mA |
| Output Configuration | High Side |
| Output Current | 16A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 27 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 36V |
| Output Current per Channel | 16A |
| Turn-Off Delay Time | 38 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 22A |
| Rds On (Typ) | 100m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 100mOhm |
| Height | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5T100AJ-E Overview
It is packaged in the manner of a Tube.It is included in the package 12-PowerLSOP (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There is a VND5T100 family of things that it belongs to.It has a total of 12 terminations.The 12 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 22A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 24V.This lighting driver is mounted in the way of Surface Mount.There are 12 pins in total on this board.The LED driver has 100mOhm resistance.Electrical components such as this are included in the VIPower? series.As a result, the output current is set to 16A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Normal operation requires Vsup above 8V.The maximum input voltage of the LED driver is 36V volts.Input voltage must be at least 8V volts.The maximum current required for its operation is 6mA.Drivers for this part number 2 are available.
VND5T100AJ-E Features
Supplied from 24V
Resistance of 100mOhm
VND5T100AJ-E Applications
There are a lot of STMicroelectronics VND5T100AJ-E Power Switches ICs applications.
- Portable GPS
- Wireless Modem Data Cards
- Hot Swaps
- Set-Top Boxes
- Hot-Swap Systems
- USB Power Distribution
- Set-top-box
- Hot Swap
- HDD, SSD
- Portable Video Game Players
