VND5T100AJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5T100 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 22A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 16A |
| Nominal Supply Current | 4.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 36V |
| Output Current per Channel | 16A |
| Nominal Input Voltage | 24V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 22A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5T100AJTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 12-PowerLSOP (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It is a member of the VND5T100 family.A total of 12 terminations have been recorded.In order to operate, the 12 pins are used.The LED driving board has a total of 1 functions.The LED driver output is limited to 16AV.To meet the operation criteria, the maximum output current drops to 22A.The supply voltage can be 24V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 12 pins.It has a resistance of 100mOhm.It is part of the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.A normal operation requires that the supply voltage (Vsup) remain above 8V.Its maximum input voltage is 36V volts.The minimum input voltage is 8V volts.For its operation, a current of 6mA is required.A total of 2 drivers are included in the part.
VND5T100AJTR-E Features
Supplied from 24V
Resistance of 100mOhm
VND5T100AJTR-E Applications
There are a lot of STMicroelectronics VND5T100AJTR-E Power Switches ICs applications.
- Hard Disk Drives
- PC Cards
- Notebook PC
- USB Ports/Hubs
- Wireless Modem Data Cards
- Smartphone and PDA
- Set-top-box
- Portable Music Players
- Telecom and Network Systems
- Smart Phones, Feature Phones
