VND600
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | Solder |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND600 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Input Current | 10mA |
| Load Current | 25A |
| Output Peak Current Limit-Nom | 40A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND600 Overview
It is packaged in the manner of a Tube.It is included in the package 16-SOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the VND600 family.It contains 16 terminations.It is necessary to use the 16 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 25A in order to meet the operation requirements.A supply voltage of 13V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 16 pins.As a result, the output current is set to 25A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A maximum supply voltage of 36V is set in Vsup.Normal operation requires Vsup above 5.5V.This part is powered by 8/36V.
VND600 Features
Supplied from 13V
VND600 Applications
There are a lot of STMicroelectronics VND600 Power Switches ICs applications.
- Notebook PC
- Hot Swaps
- USB Power Distribution
- Hard Disk Drives
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Wearable Devices
- Gaming
- Portable Devices
- Set-Top Boxes
