banner_page

VND600-E

N-Channel PMIC VND600 16 Pin 13V 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND600-E
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 583
  • Description: N-Channel PMIC VND600 16 Pin 13V 16-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Max Power Dissipation 8.3W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 13V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VND600
Pin Count 16
Number of Outputs 2
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 25A
Operating Supply Voltage 36V
Interface On/Off
Nominal Supply Current 6mA
Output Configuration High Side
Power Dissipation 8.3W
Output Current 25A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 6mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 35m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Length 10.3mm
Width 7.5mm
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers

VND600-E Overview


As a result, it is packaged in the form of a Tube.There is a package for it in the 16-SOIC (0.295, 7.50mm Width) package.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.I believe it belongs to the VND600 family.It consists of 16 terminations in total.The 16 pins are used to operate the LED driver.The LED driver has 2 functions.This results in the maximum output current dropping to 25A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.It is mounted in the way of Surface Mount.16 pins are connected to it in total.Lighting drivers with 30mOhm resistance are used.The output current is set to 25A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.When using this LED driving board, it is recommended that the supply voltage is set to 36V.Input voltage is limited to 36V volts.A voltage of 5.5V volts is the minimum input voltage.This system has a maximum current requirement of 6mA.

VND600-E Features


Supplied from 13V
Resistance of 30mOhm

VND600-E Applications


There are a lot of STMicroelectronics VND600-E Power Switches ICs applications.

  • Set-Top Boxes
  • Hot Swap
  • Storage Drives
  • Portable Music Players
  • USB Protection
  • Telecom and Network Systems
  • Solid-State Drives
  • Smartphone and PDA
  • Notebook PC
  • HDD and SSD

Write a review

Note: HTML is not translated!
    Bad           Good