VND60013TR
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND600 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 25A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 40A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
VND60013TR Overview
The LED driver's packaged as a Tape & Reel (TR).Package 16-SOIC (0.295, 7.50mm Width) contains it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Auto Restart features are available on the lighting driver.This object belongs to the VND600 family.It consists of 16 terminations in total.16 pins are used for operation.It has 1 functions.The LED driver output is limited to 25AV.As a result, the maximum output current is reduced to 40A in order to meet the operation requirements.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 16 pins.35mOhm is the resistance of the lighting driver.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.The power supply of the part is 8/36V.
VND60013TR Features
Supplied from 13V
Resistance of 35mOhm
VND60013TR Applications
There are a lot of STMicroelectronics VND60013TR Power Switches ICs applications.
- Hot Swap
- Smart Phones, Feature Phones
- Portable Video Game Players
- Solid State Drivers
- Smartphone and PDA
- USB Power Distribution
- PDAs
- Mobile Communication Devices
- Wearable Devices
- Handheld Devices
