banner_page

VND600P-E

N-Channel PMIC VND600 24 Pin 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND600P-E
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 322
  • Description: N-Channel PMIC VND600 24 Pin 16-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status NRND (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Feature Auto Restart
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 8.3W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number VND600
Pin Count 16
JESD-30 Code R-PDSO-G16
Number of Outputs 2
Output Type N-Channel
Max Output Current 40A
Operating Supply Voltage 36V
Interface On/Off
Nominal Supply Current 6mA
Output Configuration High Side
Power Dissipation 8.3W
Output Current 25A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Output Peak Current Limit-Nom 40A
Rds On (Typ) 35m Ω (Max)
Radiation Hardening No
RoHS Status ROHS3 Compliant

VND600P-E Overview


Tube is how it's packaged.There is a package for it in the 16-SOIC (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the VND600 family.It contains 16 terminations.24 pins are used for operation.This results in the maximum output current dropping to 40A to meet the operation criteria.It is mounted in the way of Surface Mount.As a result, it has a total of 16 pins.It has a resistance of 30mOhm.When this case is used, the output current is set to 25A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set at 36V.This LED driver can handle voltages up to 36V volts.Input voltage must be at least 5.5V volts.

VND600P-E Features


Resistance of 30mOhm

VND600P-E Applications


There are a lot of STMicroelectronics VND600P-E Power Switches ICs applications.

  • Wearable Devices
  • Notebook PC
  • Portable/Handheld Devices
  • Wireless Modem Data Cards
  • Smartphone and PDA
  • Storage Drives
  • USB Protection
  • Mobile Communication Devices
  • Portable Music Players
  • USB Power Distribution

Write a review

Note: HTML is not translated!
    Bad           Good