banner_page

VND600PEPTR-E

N-Channel 0.8mm PMIC VND600 24 Pin 13V 24-PowerBSOP (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND600PEPTR-E
  • Package: 24-PowerBSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 317
  • Description: N-Channel 0.8mm PMIC VND600 24 Pin 13V 24-PowerBSOP (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-PowerBSOP (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 30mOhm
Subcategory Peripheral Drivers
Max Power Dissipation 96W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.8mm
Base Part Number VND600
Pin Count 24
Number of Outputs 2
Output Type N-Channel
Max Output Current 40A
Operating Supply Voltage 36V
Interface On/Off
Nominal Supply Current 6mA
Output Configuration High Side
Power Dissipation 96W
Output Current 25A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 6mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 30m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Length 10.3mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VND600PEPTR-E Overview


Tape & Reel (TR) is how it's packaged.This package is included in 24-PowerBSOP (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.As you can see, it comes from the VND600 family.The termination count is 24.It is necessary to use the 24 pins in order to operate the LED driver.The LED driver has 1 functions.Maximum output current falls to 40A when operation criteria are met.Supply voltages of 13V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.24 pins are equipped with it.30mOhm resistance is present in the lighting driver.The output current is set to 25A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set at 36V.Its maximum input voltage is 36V volts.Input voltage must be at least 5.5V volts.For its operation, a current of 6mA is required.

VND600PEPTR-E Features


Supplied from 13V
Resistance of 30mOhm

VND600PEPTR-E Applications


There are a lot of STMicroelectronics VND600PEPTR-E Power Switches ICs applications.

  • Wearable Devices
  • PDAs
  • Portable Video Game Players
  • USB Power Distribution
  • Set-Top Boxes
  • Solid State Drivers
  • USB Ports/Hubs
  • Notebook and Tablet Computers
  • USB Power Distribution
  • Portable GPS Device

Write a review

Note: HTML is not translated!
    Bad           Good