VND600SP13TR
| Parameters | |
|---|---|
| Load Current | 25A |
| Rds On (Typ) | 30m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Termination | Gull Wing |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND600 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Input Current | 10mA |
VND600SP13TR Overview
It is packaged in the form of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package includes it.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.It comes under the family of VND600.It contains 10 terminations.The 10 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 40A.As long as the supply voltage is 13V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.10 pins are equipped with it.There is 30mOhm resistance on the LED driver.The output current is set to 25A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The Vsup value (maximum supply voltage) is set to 36V.For normal operation, the supply voltage (Vsup) must be kept above 5.5V.It has a power supply of 13V.
VND600SP13TR Features
Supplied from 13V
Resistance of 30mOhm
VND600SP13TR Applications
There are a lot of STMicroelectronics VND600SP13TR Power Switches ICs applications.
- Set-top-box
- USB Protection
- USB Power Distribution
- Hard Disk Drives
- Portable/Handheld Devices
- Hot-Swap Systems
- Solid State Drivers
- Low Voltage I/O System Power
- Smartphone and PDA
- USB3.1 Power Delivery
