VND600TR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND600 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND600TR-E Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 16-SOIC (0.295, 7.50mm Width) package.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the VND600 family.It contains 16 terminations.The operation is performed through the 16 pins.It has 2 functions.The maximum output current must drop to 25A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.It is positioned in the direction of Surface Mount.16 pins are equipped with it.Lighting drivers with 30mOhm resistance are used.The output current is set to 25A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The supply voltage should be set at 36V for best efficiency.A maximum input voltage of 36V volts can be applied to it.The minimum input voltage is 5.5V volts.It requires a maximum current requirement of 6mA.
VND600TR-E Features
Supplied from 13V
Resistance of 30mOhm
VND600TR-E Applications
There are a lot of STMicroelectronics VND600TR-E Power Switches ICs applications.
- Gaming
- Storage (HDDs, SSDs)
- HDD and SSD
- Handheld Devices
- Solid State Drivers
- Portable GPS Device
- Various applications equipped with buttons
- Portable Devices
- Smart Phones, Feature Phones
- USB Protection
