VND670SP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND670 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 30A |
| Operating Supply Voltage | 40V |
| Power Supplies | 9/18V |
| Interface | On/Off |
| Nominal Supply Current | 40mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 150 µs |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 26m Ω |
| Turn Off Time | 135 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND670SP13TR Overview
A Tape & Reel (TR) is used to package it.This file is included in package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 2.A voltage of Not Required is used to power it.In terms of features, the LED driving board has PWM Input.It comes under the family of VND670.It contains 10 terminations.For operation, 10 pins are used.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 30A.Supply voltages of 13V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.10 pins are equipped with it.Self-contained in an econtainer with a capacity of MOSFET Drivers, this LED driver is self-contained.A 9/18V power supply is used by the part.In order to optimize the efficiency of the supply voltage, it should be set to 40V.
VND670SP13TR Features
Supplied from 13V
VND670SP13TR Applications
There are a lot of STMicroelectronics VND670SP13TR Power Switches ICs applications.
- Gaming
- Portable Music Players
- USB Power Distribution
- Low Voltage I/O System Power
- Notebook PC
- Solid-State Drives
- Wireless Headsets
- Notebook and Tablet Computers
- HDD and SSD
- Various applications equipped with buttons
