VND7012AY-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerFSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7012 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Output Peak Current Limit-Nom | 75A |
| Rds On (Typ) | 12m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VND7012AY-E Overview
A Tube is used to package it.This file is included in package 36-PowerFSOP (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 2 outputs available on this lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.This object belongs to the VND7012 family.A total of 36 terminations can be found in it.In order to operate, 36 pins are used.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 60A.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.Normal operation requires Vsup above 4V.It requires 8mA current to operate.
VND7012AY-E Features
Supplied from 13V
VND7012AY-E Applications
There are a lot of STMicroelectronics VND7012AY-E Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Ports/Hubs
- Portable GPS Device
- USB Power Distribution
- Hot-Swap Systems
- Solid State Drivers
- Hard Disk Drives
- Gaming
- Wireless Headsets
- Smart Phones, Feature Phones
