VND7020AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7020 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 22m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VND7020AJ-E Overview
A Tube is used to package it.There is a 16-PowerLFSOP (0.154, 3.90mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.A lighting driver with Auto Restart, Status Flag features is available.This object belongs to the VND7020 family.It consists of 16 terminations in total.The operation is performed through the 16 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 45A in order to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.It belongs to the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4V.8mA is the maximum current required to operate it.
VND7020AJ-E Features
Supplied from 13V
VND7020AJ-E Applications
There are a lot of STMicroelectronics VND7020AJ-E Power Switches ICs applications.
- PDAs
- Telecom and Network Systems
- Set-top-box
- USB3.1 Power Delivery
- Wearable Devices
- Wireless Headsets
- Notebook and Tablet Computers
- Solid State Drivers
- HDD, SSD
- USB Power Distribution
