VND7020AJTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7020 |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 22m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND7020AJTR-E Overview
Cut Tape (CT) is the way it's packaged.Package 16-PowerLFSOP (0.154, 3.90mm Width) contains it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Auto Restart, Status Flag features is available.This object belongs to the VND7020 family.There are 16 terminations in it.In order to operate, the 16 pins are used.It contains 1 functions.As a result, the maximum output current is reduced to 45A in order to meet the operation requirements.High efficiency is possible at 13V supply voltage.It is positioned in the direction of Surface Mount.It is part of the VIPower? series.As a result, the output current is set to 45A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4V.There is a maximum current requirement of 8mA for its operation.
VND7020AJTR-E Features
Supplied from 13V
VND7020AJTR-E Applications
There are a lot of STMicroelectronics VND7020AJTR-E Power Switches ICs applications.
- Portable GPS
- Gaming
- Hot-Swap Systems
- PC Cards
- Telecom and Network Systems
- Portable GPS Device
- Smartphone and PDA
- Portable Music Players
- Hot Swaps
- Low Voltage I/O System Power
