VND7030AJTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND7030 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 31m Ω |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
VND7030AJTR Overview
The LED driver's packaged as a Cut Tape (CT).Package 16-PowerLFSOP (0.154, 3.90mm Width) contains it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart, Status Flag features are available on the lighting driver.I believe it belongs to the VND7030 family.It consists of 16 terminations in total.16 pins are used for operation.As far as the lighting driver is concerned, there are 2 functions.The maximum output current must drop to 40A to meet the operation criteria.The supply voltage can be 13V for high efficiency.A component of this type is included in the VIPower? series.In order to operate normally, the supply voltage (Vsup) must remain above 4V.
VND7030AJTR Features
Supplied from 13V
VND7030AJTR Applications
There are a lot of STMicroelectronics VND7030AJTR Power Switches ICs applications.
- Set-top-box
- Hot Swaps
- Notebook and Tablet Computers
- PC Card Hot Swap
- Set-Top Boxes
- USB Power Distribution
- USB Power Distribution
- Solid State Drivers
- Hard Disk Drives
- Portable Music Players
