VND7040AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7040 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 24A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 40m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND7040AJ-E Overview
The LED driver's packaged as a Tube.It is included in the package 16-PowerLFSOP (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Auto Restart, Status Flag.As you can see, it comes from the VND7040 family.The termination count is 16.In order to operate, the 16 pins are used.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 24A when operation criteria are met.The supply voltage can be 13V for high efficiency.In this case, it is mounted in the way of Surface Mount.Electrical components such as this are included in the VIPower? series.Normal operation requires a voltage above 4V for the supply voltage.The maximum current required for its operation is 8mA.
VND7040AJ-E Features
Supplied from 13V
VND7040AJ-E Applications
There are a lot of STMicroelectronics VND7040AJ-E Power Switches ICs applications.
- Hot Swap
- HDD, SSD
- Portable GPS
- Smart Phones, Feature Phones
- Notebook PC
- PC Cards
- Storage (HDDs, SSDs)
- Solid State Drivers
- Smartphone and PDA
- Portable/Handheld Devices
