VND7040AJTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7040 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 24A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 40m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND7040AJTR-E Overview
Cut Tape (CT) is how it's packaged.It is included with the 16-PowerLFSOP (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Auto Restart, Status Flag features available on the LED driving board.There is a VND7040 family of things that it belongs to.A total of 16 terminations have been recorded.It is necessary to use the 16 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 24A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.Electrical components such as this are included in the VIPower? series.For normal operation, the supply voltage (Vsup) must be kept above 4V.It has a maximum current requirement of 8mA.
VND7040AJTR-E Features
Supplied from 13V
VND7040AJTR-E Applications
There are a lot of STMicroelectronics VND7040AJTR-E Power Switches ICs applications.
- Set-Top Boxes
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Hot Swaps
- USB3.1 Power Delivery
- USB Ports/Hubs
- USB Protection
- Portable Devices
- USB Power Distribution
- Smartphone and PDA
