VND7050AJ-E
| Parameters | |
|---|---|
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND7050 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 21A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
VND7050AJ-E Overview
Tube is how it's packaged.There is a package for it in the 16-PowerLFSOP (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 2 outputs.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Auto Restart, Status Flag.There is a VND7050 family of things that it belongs to.As a result, there are 16 terminations.For operation, 16 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 21A.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.This electrical component can be found in the VIPower? series.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4V.A maximum current requirement of 8mA is required for its operation.
VND7050AJ-E Features
Supplied from 13V
VND7050AJ-E Applications
There are a lot of STMicroelectronics VND7050AJ-E Power Switches ICs applications.
- Storage Drives
- Set-Top Boxes
- USB Power Distribution
- USB Protection
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Hard Disk Drives
- Hot Swap
- Storage (HDDs, SSDs)
- Notebook PC
