VND7N04-1
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 6.2mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 7A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
VND7N04-1 Overview
As you can see, it's packaged in the way of a Tube.There is a TO-251-3 Short Leads, IPak, TO-251AA package that includes it.In this case, the LED driving board is mounted as Through Hole.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is a member of the VND7N family.It has a total of 3 terminations.During operation, the 3 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 7A to meet the operation criteria.Through Hole is mounted in the way of this LED driving board.It is equipped with a total of 3 pins.60mOhm resistance is present in the lighting driver.This electrical component is included in the OMNIFET II?, VIPower? series.This case has the output current set to 4A.
VND7N04-1 Features
Resistance of 60mOhm
VND7N04-1 Applications
There are a lot of STMicroelectronics VND7N04-1 Power Switches ICs applications.
- Gaming
- Hot Swap
- Low Voltage I/O System Power
- Various applications equipped with buttons
- USB Power Distribution
- USB Power Distribution
- PDAs
- PC Card Hot Swap
- Set-Top Boxes
- Handheld Devices
