VND7N04-1-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 6.2mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND7N04-1-E Overview
As you can see, it's packaged in the way of a Tube.This package is included in TO-251-3 Short Leads, IPak, TO-251AA.Mounting type Through Hole is selected for the LED driving board.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a VND7N family of things that it belongs to.It has a total of 3 terminations.The 3 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 9A when operation criteria are met.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are included in this LED driver.It has a resistance of 60mOhm.These electrical components are part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 4A.
VND7N04-1-E Features
Resistance of 60mOhm
VND7N04-1-E Applications
There are a lot of STMicroelectronics VND7N04-1-E Power Switches ICs applications.
- Hot Swap
- Hot-Swap Systems
- Wireless/Networking Cards
- Portable GPS Device
- Portable GPS
- Solid-State Drives
- Mobile Communication Devices
- Telecom and Network Systems
- USB Power Distribution
- Handheld Devices
