VND7N04
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 7A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND7N04 Overview
It's?packaged?in?the way?of?a?Tube.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.I believe it belongs to the VND7N family.There are 2 terminations in it.For operation, we use the 3 pins.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 7A.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 3 pins.60mOhm resistance is present in the lighting driver.This electrical component is included in the OMNIFET II?, VIPower? series.The output current is set to 4A in this case.
VND7N04 Features
Resistance of 60mOhm
VND7N04 Applications
There are a lot of STMicroelectronics VND7N04 Power Switches ICs applications.
- Handheld Devices
- Wireless Headsets
- USB Power Distribution
- Set-top-box
- Storage Drives
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Hot Swap
- Notebook and Tablet Computers
- Various applications equipped with buttons
