VND7N04-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
VND7N04-E Overview
It is package in Tube case.There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.This object belongs to the VND7N family.It has a total of 2 terminations.The operation is carried out using the 3 pins.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 9A.Surface Mount is mounted in the way of this lighting driver.A total of 3 pins are included in this LED driver.Currently, the LED driving board has 60mOhm resistance.This electrical component is part of the OMNIFET II?, VIPower? series.The output current is set to 4A in this case.
VND7N04-E Features
Resistance of 60mOhm
VND7N04-E Applications
There are a lot of STMicroelectronics VND7N04-E Power Switches ICs applications.
- HDD and SSD
- Smart Phones, Feature Phones
- Hot Swaps
- USB Power Distribution
- Portable Video Game Players
- Solid State Drivers
- PC Card Hot Swap
- Wireless Modem Data Cards
- PDAs
- Portable Devices
