VND7N0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 42V |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Current Rating | 7A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 7A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 7 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND7N0413TR Overview
A Tape & Reel (TR) is used to package it.It's included in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.It comes under the family of VND7N.In total, there are 2 terminations.The operation is performed through the 3 pins.The LED driving board has a total of 1 functions.The maximum output current must drop to 4A to meet the operation criteria.Surface Mount is mounted in the way.There are 3 pins in total on this board.This electrical component is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 4A.
VND7N0413TR Features
VND7N0413TR Applications
There are a lot of STMicroelectronics VND7N0413TR Power Switches ICs applications.
- PC Card Hot Swap
- Wireless Headsets
- Notebook and Tablet Computers
- Set-top-box
- Hot Swap
- Gaming
- Hot Swaps
- Notebook PC
- PC Cards
- USB Ports/Hubs
