VND7NV04-1-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 17A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 7.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND7NV04-1-E Overview
Tube is how it's packaged.In the TO-251-3 Short Leads, IPak, TO-251AA package, it is included.This LED driving board is mounted using the mounting type Through Hole.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.I believe it belongs to the VND7N family.In total, there are 3 terminations.3 pins are used for operation.There are 1 functions of the LED driver.The maximum output current drops to 9A in order to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.This LED driver is equipped with a total of 3 pins.Lighting drivers with 60mOhm resistance are used.There is an electrical component included in the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 6A.It operates at a maximum current of 100μA.
VND7NV04-1-E Features
Resistance of 60mOhm
VND7NV04-1-E Applications
There are a lot of STMicroelectronics VND7NV04-1-E Power Switches ICs applications.
- Hot Swap
- Set-Top Boxes
- Smartphone and PDA
- Solid-State Drives
- Portable/Handheld Devices
- HDD and SSD
- Storage Drives
- USB Power Distribution
- Portable Devices
- HDD, SSD
