VND7NV0413TR
| Parameters | |
|---|---|
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND7N |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
VND7NV0413TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of N-Channel volts.It comes under the family of VND7N.It consists of 2 terminations in total.In order to operate, the 3 pins are used.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 9A when operation criteria are met.Surface Mount is mounted in the way.It is equipped with a total of 4 pins.Lighting drivers with 60mOhm resistance are used.It is included in the OMNIFET II?, VIPower? series.In this case, the output current is set to 6A.It operates at a maximum current of 100μA.
VND7NV0413TR Features
Resistance of 60mOhm
VND7NV0413TR Applications
There are a lot of STMicroelectronics VND7NV0413TR Power Switches ICs applications.
- Portable GPS
- Gaming
- Hot-Swap Systems
- Hot Swaps
- HDD, SSD
- Wireless Modem Data Cards
- Portable GPS Device
- USB Power Distribution
- Hot Swap
- Wireless/Networking Cards
