Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Manufacturer Package Identifier |
TO-252-P032P |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
60W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.25mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND7N |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
9A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
60W |
Output Current |
-10.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
100 ns |
Switch Type |
General Purpose |
Rise Time |
470ns |
Drain to Source Voltage (Vdss) |
45V |
Fall Time (Typ) |
350 ns |
Turn-Off Delay Time |
500 ns |
Continuous Drain Current (ID) |
6A |
Threshold Voltage |
500mV |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
45V |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Drain to Source Resistance |
60mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Nominal Vgs |
500 mV |
On-State Resistance |
60mOhm |
Height |
2.4mm |
Length |
6.6mm |
Width |
6.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VND7NV04TR-E Overview
It is packaged in the manner of a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND7N family contains this object.The termination count is 2.For operation, we use the 3 pins.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 9A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 3 pins.60mOhm is the resistance of the lighting driver.It is included in the OMNIFET II?, VIPower? series.In this case, the output current is set to -10.5A.
VND7NV04TR-E Features
Resistance of 60mOhm
VND7NV04TR-E Applications
There are a lot of STMicroelectronics VND7NV04TR-E Power Switches ICs applications.
- Portable Music Players
- USB Power Distribution
- Wireless Headsets
- Solid State Drivers
- USB Ports/Hubs
- HDD and SSD
- Various applications equipped with buttons
- USB Power Distribution
- HDD, SSD
- Mobile Communication Devices