VND810
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND810 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810 Overview
It is package in Tube case.Package 16-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 2.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.I believe it belongs to the VND810 family.It consists of 16 terminations in total.It is necessary to use the 16 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.The maximum output current drops to 3.5A in order to meet the operation criteria.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 16 pins.160mOhm resistance is present in the lighting driver.This electrical component is part of the VIPower? series.It is set to 5A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.When using this LED driving board, it is recommended that the supply voltage is set to 36V.As far as input voltage goes, its maximum is 36V volts.Input voltage must be at least 5.5V volts.12μA is the maximum current required to operate it.
VND810 Features
Supplied from 13V
Resistance of 160mOhm
VND810 Applications
There are a lot of STMicroelectronics VND810 Power Switches ICs applications.
- Gaming
- Telecom and Network Systems
- Set-Top Boxes
- Wireless Modem Data Cards
- Portable Music Players
- Hot Swap
- Notebook and Tablet Computers
- USB Protection
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
