VND810-E
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND810 |
| Pin Count | 16 |
| Number of Outputs | 2 |
VND810-E Overview
It's?packaged?in?the way?of?a?Tube.This package is included in 16-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.The VND810 family consists of this type.A total of 16 terminations have been recorded.In order to operate, the 16 pins are used.There are 2 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 3.5A.Using a voltage of 13V allows for high efficiency.It is mounted in the way of Surface Mount.As a result, it has a total of 16 pins.Currently, the LED driving board has 160mOhm resistance.This electrical component is included in the VIPower? series.As a result, the output current is set to 5A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It is recommended to set the supply voltage to 36V for optimum efficiency.The maximum input voltage of the LED driver is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.A maximum current requirement of 12μA is required for its operation.
VND810-E Features
Supplied from 13V
Resistance of 160mOhm
VND810-E Applications
There are a lot of STMicroelectronics VND810-E Power Switches ICs applications.
- USB Power Distribution
- Notebook PC
- HDD, SSD
- HDD and SSD
- Various applications equipped with buttons
- Telecom and Network Systems
- Wireless Headsets
- Set-Top Boxes
- Hard Disk Drives
- Set-top-box
