VND810MSP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 52W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND810 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 52W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810MSP-E Overview
As a result, it is packaged in the form of a Tube.Package PowerSO-10 Exposed Bottom Pad contains it.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.As you can see, it comes from the VND810 family.A total of 10 terminations can be found in it.The 10 pins are used for the operation of the system.There are 2 functions of the LED driver.It is necessary to reduce the maximum output current to 900mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 10 pins.Currently, the LED driving board has a resistance of 150mOhm ohms.It is included in the VIPower? series.This case has the output current set to 600mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, Vsup (maximum supply voltage) is set to 36V.A 8/36V power supply is used by the part.Optimal efficiency requires a voltage of 13V.
VND810MSP-E Features
Supplied from 13V
Resistance of 150mOhm
VND810MSP-E Applications
There are a lot of STMicroelectronics VND810MSP-E Power Switches ICs applications.
- Portable Video Game Players
- Portable GPS Device
- Hot Swap
- USB Protection
- Smartphone and PDA
- USB Ports/Hubs
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- PDAs
- Storage Drives
