banner_page

VND810MSP13TR

13V N-Channel PMIC VIPower? Series VND810 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND810MSP13TR
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 983
  • Description: 13V N-Channel PMIC VIPower? Series VND810 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart, Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Max Power Dissipation 52W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VND810
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 600mA
Operating Supply Voltage 41V
Supply Voltage-Max (Vsup) 36V
Power Supplies 13V
Interface On/Off
Nominal Supply Current 12μA
Output Configuration High Side
Power Dissipation 52W
Output Current 600mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 0.9A
Rds On (Typ) 150m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VND810MSP13TR Overview


A Tape & Reel (TR) is used to package it.It is included in the package PowerSO-10 Exposed Bottom Pad.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.It is part of the VND810 family of LED drivers.A total of 10 terminations have been found in it.In order to operate, 10 pins are used.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 600mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 10 pins.These electrical components are part of the VIPower? series.In this case, the output current is set to 600mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 36V (Vsup).In this case, the power supply is 13V.A supply voltage of 41V is recommended for maximum efficiency.

VND810MSP13TR Features


Supplied from 13V

VND810MSP13TR Applications


There are a lot of STMicroelectronics VND810MSP13TR Power Switches ICs applications.

  • USB3.1 Power Delivery
  • Solid-State Drives
  • Notebook and Tablet Computers
  • USB Power Distribution
  • USB Protection
  • Hot-Swap Systems
  • Telecom and Network Systems
  • Handheld Devices
  • Mobile Communication Devices
  • Wireless/Networking Cards

Write a review

Note: HTML is not translated!
    Bad           Good