VND810MSPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 52W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND810 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 52W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810MSPTR-E Overview
The package is in the form of a Tape & Reel (TR).This package is included in PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.By default, it is set to output 2.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.It is part of the VND810 family of LED drivers.It consists of 10 terminations in total.During operation, the 10 pins are used.As far as functions are concerned, the lighting driver has 2.To comply with the operation criteria, the maximum output current is reduced to 900mA.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.Currently, the LED driving board has a resistance of 150mOhm ohms.A component of this type is included in the VIPower? series.When this is the case, the output current is set to 600mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage for this lighting driver is set to 36V (Vsup).This part is powered by 8/36V.For maximum efficiency, the supply voltage should be set to 13V.
VND810MSPTR-E Features
Supplied from 13V
Resistance of 150mOhm
VND810MSPTR-E Applications
There are a lot of STMicroelectronics VND810MSPTR-E Power Switches ICs applications.
- Wireless Modem Data Cards
- Handheld Devices
- Portable Devices
- Hot Swap
- PC Card Hot Swap
- Wireless/Networking Cards
- USB Power Distribution
- Wireless Headsets
- Hot Swaps
- Portable Video Game Players
