Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
12-PowerLSOP (0.154, 3.90mm Width) |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
12 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
54W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND810 |
Pin Count |
12 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
25μA |
Output Configuration |
High Side |
Power Dissipation |
54W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
25μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
160m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Lifecycle Status |
NRND (Last Updated: 8 months ago) |
VND810PEP-E Overview
It is package in Tube case.This file is included in package 12-PowerLSOP (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 2 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.This object belongs to the VND810 family.As a result, there are 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 2.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.Using a voltage of 13V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.12 pins are connected to it in total.It has 160mOhm resistance.A component of this type is included in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Vsup (maximum supply voltage) is set to 36V.There is a voltage supply of 8/36V volts on this part.Optimal efficiency requires a voltage of 13V.It requires 25μA current to operate.
VND810PEP-E Features
Supplied from 13V
Resistance of 160mOhm
VND810PEP-E Applications
There are a lot of STMicroelectronics VND810PEP-E Power Switches ICs applications.
- USB Power Distribution
- USB Ports/Hubs
- Handheld Devices
- PC Cards
- Hot Swap
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Portable GPS
- Wearable Devices