VND810PEPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND810 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 25μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810PEPTR-E Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 12-PowerLSOP (0.154, 3.90mm Width) package.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 2.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.It is part of the VND810 family of LED drivers.It contains 12 terminations.12 pins are used for operation.It is important to note that the LED driving board has 2 functions.The maximum output current drops to 3.5A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.A total of 12 pins are included in this LED driver.It has 160mOhm resistance.This electrical component can be found in the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).In this case, the power supply is 8/36V.In order to achieve the best efficiency, the supply voltage should be set to 13V.It requires 25μA current to operate.
VND810PEPTR-E Features
Supplied from 13V
Resistance of 160mOhm
VND810PEPTR-E Applications
There are a lot of STMicroelectronics VND810PEPTR-E Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- PC Cards
- Wireless/Networking Cards
- Set-top-box
- Handheld Devices
- Storage Drives
- HDD, SSD
- Low Voltage I/O System Power
- Solid State Drivers
